Blog · Lifts · Standards

Braille on lift buttons: what EN 81-70 requires and in which countries it is mandatory

History, editions of the standard (2003–2022), requirements for button panels and the country-by-country map, explained for lift technicians

By Uriepero Ramón – Academia Técnico Pro ·

“Braille in lifts is mandatory under the European standard.” That is only half true. The European accessibility standard, EN 81-70, requires buttons to be identifiable by touch, with symbols in tactile relief. Braille, on the other hand, is left optional. What makes it mandatory is each country’s law: Spain, the United States or Chile, for example. Here are the history, the editions of the standard, what it requires on button panels and the country-by-country map.

The short answer

  • EN 81-70 (Europe): raised relief is mandatory on car buttons (at least 0.8 mm). Braille is optional: it appears in Annex D, which is informative, with the sentence “Braille characters may be provided”.
  • Braille required by law: Spain (CTE, accessible lift), USA (ADA), Chile (OGUC). Canada requires it in the accessibility appendix of CSA B44, which is applied by the provinces that follow the national building code.
  • Tactile relief only: Switzerland (SIA 500), the United Kingdom (Approved Document M) and Argentina (Decreto 914/97). In these countries, Braille is a recommended extra.

A little history: Louis Braille

Louis Braille was born in Coupvray (France) in 1809 and died in Paris in 1852. Starting from a dot code by Charles Barbier, he created a more compact system. He presented it in 1825, aged 15 (some sources say 1824), and published the first version in 1829. France adopted it officially in 1854.

Each character is a 6-dot cell in two columns of three. Numbers are written with a number sign (dots 3-4-5-6) followed by the letters a–j. That is why the “1” in a lift takes two cells. The dimensions for signage and equipment are set by ISO 17049:2013:

  • Dot diameter: 1.0 to 1.7 mm.
  • Dot height: 0.3 to 0.7 mm. The standard recommends more than 0.5 mm outdoors and in vehicles.
  • Dot spacing: 2.2 to 2.8 mm vertically and 2.0 to 2.8 mm horizontally. Between cells, 5.1 to 6.8 mm.
  • A clear zone of at least 6 mm all around, so that nothing gets in the way of the finger.

EN 81-70 and its editions

EN 81-70 is the CEN (European Committee for Standardization) standard on “Accessibility to lifts for persons including persons with disability”. It complements EN 81-20 and EN 81-50, which deal with safety. Each country adopts it with its own prefix: UNE-EN 81-70 in Spain, SN EN 81-70 in Switzerland, BS EN 81-70 in the United Kingdom.

  • 2003: first edition, EN 81-70:2003, with amendment A1 of 2004. In Spain it was published as UNE-EN 81-70:2004.
  • 2018: full revision, published on 16 May 2018. But on 6 March 2019 the European Commission refused to cite it in the Official Journal of the EU (OJEU). The European Blind Union (EBU) had above all criticised the low contrast required for the buttons.
  • 2021: EN 81-70:2021, approved by CEN on 12 January 2021, replaces the 2018 edition.
  • A1:2022: amendment approved on 8 May 2022 that tightens the contrast (LRV values). Countries had to adopt it as a national standard by January 2023.
  • August 2023: EN 81-70:2021+A1:2022 appears in the OJEU. It gives presumption of conformity with the Lifts Directive.
  • 21 February 2025: the 2003+A1:2004 edition is removed from that list.

The legal basis in the EU is the Lifts Directive 2014/33/EU. Its Annex I, point 1.6.1, says that the controls of lifts intended for use by unaccompanied disabled persons must be designed and located accordingly. EN 81-70 is a voluntary way of meeting that requirement. Complying with it gives presumption of conformity, but the Directive does not require Braille.

Worldwide, ISO published ISO 8100-7:2024 on 22 October 2024, the international equivalent of EN 81-70. The button symbols (alarm, door open and door close, etc.) come from ISO 4190-5:2006, Table C.1.

What EN 81-70:2021+A1:2022 requires for push buttons

Tables 4 and 5 of the standard set the design and position of landing (call) push buttons and car push buttons:

  • Size: active part of at least 490 mm², large enough to contain a 20 mm circle.
  • Identification: visible by contrast and recognisable by touch, because it stands out from the faceplate.
  • Operating force: 2.5 to 5.0 N, with perceptible mechanical feedback.
  • Registration signal: visible and audible, even if the call is already registered.
  • Symbol: on the active part or 10 to 15 mm to its left, in relief, contrasting and 15 to 40 mm high. Mandatory in the car; at the landing, “where provided”.
  • Relief height: at least 0.8 mm, 1.0 mm recommended.
  • Building exit floor: in the car, its button stands 5 ± 1 mm proud of the others, preferably in green.
  • Heights: the centreline of the lowest button at 850 mm or more above the floor. That of the highest at 1,100 mm maximum at the landing and 1,200 mm in the car (1,100 mm preferred).
  • Distance from the corner: 500 mm at the landing (700 preferred) and 400 mm in the car.
  • Numeric keypads: the “5” has a raised dot and the standard expressly says that Braille shall not be used.

And Braille? It is in Annex D (informative), which gives guidance on improving accessibility. It says that Braille characters may be provided. If they are, they should comply with ISO 17049 and be at least 5 mm from the relief symbol. In other words: EN 81-70 does not make Braille mandatory, only tactile relief.

The country-by-country map

Spain: Braille mandatory

The Código Técnico de la Edificación (CTE DB-SUA, Annex A) defines the “accessible lift” (ascensor accesible). It must comply with UNE-EN 81-70:2004 and also: “The button panel includes characters in Braille and in high relief, with colour contrast”. DB-SUA 9 adds that the floor number goes in Braille and in raised Arabic numerals on the right-hand door jamb (as you exit the car), at a height of 0.80–1.20 m. In urbanised public spaces, Orden TMA/851/2021 (Article 16) also requires relief and Braille on button panels.

Switzerland: relief, not Braille

Besides SN EN 81-70, the SIA 500 standard “Hindernisfreie Bauten” (barrier-free buildings) applies. It calls for buttons that can be detected by touch and lettering in relief, preferably on the active part of the button. The Fachstelle Hindernisfreie Architektur recommends putting the floor number in relief on both door jambs, at 1.40–1.60 m. I have not found any Braille requirement for button panels.

United Kingdom: relief

BS EN 81-70 applies. Approved Document M (Volume 1, dwellings) calls for tactile floor indication at the landing, next to the call button, and on the car buttons. It does not mention Braille. I have not checked Volume 2.

United States: Braille mandatory since 1991

The first ADA guidelines (ADAAG, 26 July 1991) already required Braille and raised characters on car buttons. The current ones, the 2010 ADA Standards, were adopted on 15 September 2010 and have been mandatory since 15 March 2012. They require:

  • Car buttons: raised characters and Braille, immediately to the left of the button (407.4.7.1).
  • Door jambs: floor number in relief (at least 51 mm) and in Braille on both jambs of every entrance, with a star at the main floor (407.2.3.1).
  • Type of Braille: Grade 2 (contracted), with a dot height of 0.6 to 0.9 mm. On the button panel, at least 4.8 mm from the raised character.

For the landing call button, the ADA does not ask for Braille: the Braille goes on the jambs. Safety is covered by the ASME A17.1 code.

Canada

Canada and the USA share the ASME A17.1/CSA B44 code. Its “nonmandatory” Appendix E applies where the national building code (NBCC) is followed. It calls for raised characters and Braille immediately to the left of each car button.

Australia

The building code (NCC) still references AS 1735.12 of 1999. It requires a tactile symbol and its Braille equivalent at least when the landing up and down buttons are not vertically aligned within 200 mm; I could not read the rest of its Braille requirements. The 2020 version adopts EN 81-70:2018 with modifications, but it does not apply automatically.

Latin America

  • Chile: according to Braille Chile’s summary, the OGUC (Article 4.1.7, amended by DS 50 of 2016) requires buttons of at least 2 cm, raised, contrasting and with the numbering in Braille alongside. The button panel goes between 0.90 and 1.20 m high.
  • Argentina: Decreto 914/97 (the regulation of Law 22.431, amended by Law 24.314) calls, to the left of the push buttons, for signage “for blind and visually impaired people” in relief and in a contrasting colour, with characters of 1 to 1.5 cm. The car button panel goes between 0.80 and 1.30 m and the landing push buttons between 0.90 and 1.00 m. That text does not mention Braille.
  • Colombia: Decreto 1538 of 2005 makes NTC 4349 mandatory in buildings used by the public. I could not read the standard, so I do not confirm what it says about Braille.
  • Mexico: NMX-R-050-SCFI-2006 is a voluntary Mexican standard, not a NOM. I could not confirm what it requires on Braille either.

Key dates

DateMilestone
1809Louis Braille is born in Coupvray (France)
1825He presents his dot system, aged 15
1829He publishes the first version of the method
1854France officially adopts Braille
26-07-1991USA: ADAAG, Braille mandatory on car buttons
1997Argentina: Decreto 914/97, relief next to the push buttons
2003 / 2004First EN 81-70 and its amendment A1; UNE-EN 81-70:2004
2010 / 20122010 ADA Standards, mandatory from 15-03-2012
2013ISO 17049: Braille dimensions for signage and equipment
16-05-2018EN 81-70:2018 (not cited in the OJEU)
12-01-2021CEN approves EN 81-70:2021
08-05-2022Amendment A1:2022 (contrast)
August 2023EN 81-70:2021+A1:2022 cited in the OJEU
22-10-2024ISO 8100-7:2024, international accessibility standard
21-02-2025EN 81-70:2003+A1:2004 is removed from the OJEU list

Tips for technicians: installation and modernisation

  • Don’t stop at EN 81-70. Before ordering button panels, check the rules for the country and the type of building. In Spain, an accessible lift has Braille, full stop. In Switzerland, tactile relief is what is mandatory.
  • Position: Braille goes to the left of the button or below the relief symbol, at least 5 mm away (EN 81-70) or 4.8 mm (ADA). Never on the surface you press.
  • Numeric keypads: under EN 81-70, a raised dot on the “5” and no Braille.
  • Check with your finger and with a calliper: symbol relief of 0.8 mm or more, and Braille dots that are rounded, not flat.
  • In a modernisation, check that the Braille matches the real floor designations (−1, 0, 1…). A typical mistake is an adhesive label stuck on the wrong button or upside down.
  • Document in the file which standard and which edition you applied: 2003+A1:2004 or 2021+A1:2022.

Conclusion

EN 81-70 was born in 2003 and its current version is 2021+A1:2022. It makes tactile relief mandatory and leaves Braille optional; what makes Braille mandatory is each country’s law (CTE in Spain, ADA in the USA, OGUC in Chile). For technicians, the practical rule is simple: always check the country’s standard, and if in doubt, fit Braille and fit it properly. For those who need it, it changes their lives, and it bothers no one.

If you work on lifts, you will find more practical manuals for lift technicians at Academia Técnico Pro.

Uriepero Ramón – Academia Técnico Pro

Sources

  1. European Lift Association (ELA) / LEIA, “Information Note EN 81-70:2021+A1:2022” (QTC-N2424), March 2024: history of the 2003, 2018, 2021 and A1:2022 editions, OJEU and Annex D. www.leia.co.uk
  2. BS EN 81-70:2021 (text of EN 81-70:2021): Tables 4 and 5, clause 5.4, keypads and Annex D f) on Braille. Public copy on mscbelgelendirme.com. mscbelgelendirme.com
  3. CEN, EN 81-70:2021+A1:2022, catalogue entry. standards.iteh.ai
  4. European Blind Union (EBU), “Accessibility of lifts”: EN 81-70:2018 published on 16-05-2018 and rejected by the Commission on 06-03-2019. www.euroblind.org
  5. Directive 2014/33/EU on lifts, Annex I, point 1.6.1 (EUR-Lex). eur-lex.europa.eu
  6. ISO 8100-7:2024, accessibility to lifts (catalogue entry, published 22-10-2024). standards.iteh.ai
  7. ISO 4190-5:2006, control devices and signals (catalogue entry). standards.iteh.ai
  8. ISO 17049:2013, application of Braille on signage, equipment and appliances (public sample): Tables 1 and 2. cdn.standards.iteh.ai
  9. Código Técnico de la Edificación, DB SUA (version of 14 June 2022): Annex A “Ascensor accesible” and SUA 9. www.codigotecnico.org
  10. Orden TMA/851/2021 of 23 July (BOE-A-2021-13488), Article 16. www.boe.es
  11. Fachstelle Hindernisfreie Architektur (Switzerland), “Aufzüge in öffentlich zugänglichen Bauten” (SIA 500 and SN EN 81-70). hindernisfreie-architektur.ch
  12. Garaventa Lift, “SIA 500 Lift Norm”: lettering in relief on the buttons. www.garaventalift.ch
  13. Approved Document M, Volume 1 (dwellings), 2015 edition incorporating 2016 amendments (United Kingdom). assets.publishing.service.gov.uk
  14. U.S. Access Board, 2010 ADA Standards for Accessible Design: 407.2.3.1, 407.4.7.1, 703.3 and timeline (1991, 2010, 2012). www.access-board.gov
  15. U.S. Access Board, 1991 ADAAG, 4.10.12 “Car Controls”. www.access-board.gov
  16. U.S. Access Board, guide “Chapter 4: Elevators and Platform Lifts”. www.access-board.gov
  17. CSA Group, ASME A17.1/CSA B44, Nonmandatory Appendix E (requirements for persons with disabilities). www.csagroup.org
  18. Association of Consultants in Access Australia, “Access Insight: locating lift call buttons on the lift door jamb” (AS 1735.12-1999, clauses 7.1 and 7.3.3). access.asn.au
  19. Association of Consultants in Access Australia, “Access Insight December 2025: Lift Standards” (AS 1735.12:2020). access.asn.au
  20. Braille Chile, “Normativa de señalética braille” (summary of the OGUC, Art. 4.1.7, and DS 50 of 2016; secondary source). www.braillechile.cl
  21. Argentina, Decreto 914/97 (InfoLEG), Annex A.1.4.2.3. servicios.infoleg.gob.ar
  22. Braillito, “Ascensor accesible: cabina, puertas, botonera y señales” (Colombia, Decreto 1538 of 2005 and NTC 4349; Mexico, NMX-R-050-SCFI-2006). braillito.com
  23. ONCE, “Louis Braille, inventor del sistema de puntos en relieve”. www.once.es
  24. The New York Public Library, “El origen del Braille” (2021). www.nypl.org
  25. Wikipedia, “Louis Braille” (presentation of the system in 1825). en.wikipedia.org